SC Alert: Host System has Reset Executing Power On Self Test 0> 0>@(#)Sun Fire[TM] V210/V240,Netra[TM] 210/240 POST 4.22.33 2007/06/18 13:07 /export/delivery/delivery/4.22/4.22.33/post4.22.x/Fiesta/enxs/integrated (root) 0>Copyright 2007 Sun Microsystems, Inc. All rights reserved 0>OBP->POST Call with %o0=00000800.01014000. 0>Diag level set to MAX. 0>Verbosity level set to NORMAL. 0>Start Selftest..... 0>CPUs present in system: 0 1 0>Test CPU(s)..../ SC Alert: VOLTAGE_SENSOR @ MB.BAT.V_BAT has exceeded low warning threshold. Done 0>Interrupt Crosscall....Done 0>Init Memory....Done 0>PLL Reset....Done 0>Init Memory....Done 0>Test Memory....Done 0>Test CPU Caches....Done 0>Functional CPU Tests....Done 0>IO-Bridge Tests....Done 0>INFO: 0> POST Passed all devices. 0> 0>POST: Return to OBP. SC Alert: Host System has Reset Configuring system memory & CPU(s) Probing system devices Starting RTC .. Probing memory Probing I/O buses Sun Fire V210, No Keyboard Copyright 2007 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.33, 16384 MB memory installed, Serial #57907823. Ethernet address 0:3:ba:73:9a:6f, Host ID: 83739a6f. Running diagnostic script obdiag/normal Testing /pci@1e,600000/ide@d Testing /pci@1e,600000/isa@7/rtc@0,70 Testing /pci@1c,600000/scsi@2 Testing /pci@1c,600000/scsi@2,1 Testing /pci@1e,600000/isa@7/serial@0,2e8 Testing /pci@1e,600000/isa@7/serial@0,3f8 {1} ok boot net Probing system devices Probing memory Probing I/O buses Sun Fire V210, No Keyboard Copyright 2007 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.33, 16384 MB memory installed, Serial #57907823. Ethernet address 0:3:ba:73:9a:6f, Host ID: 83739a6f. Rebooting with command: boot net Boot device: /pci@1f,700000/network@2 File and args: 1000 Mbps FDX Link up Requesting Internet Address for 0:3:ba:73:9a:6f Requesting Internet Address for 0:3:ba:73:9a:6f Requesting Internet Address for 0:3:ba:73:9a:6f Requesting Internet Address for 0:3:ba:73:9a:6f >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.16 (Wed Dec 28 16:26:00 CET 2011) 1000 Mbps FDX Link up Using BOOTP protocol: ip addr=10.0.1.82 hostname=usiii-bge0 netmask=255.255.255.0 gateway=10.0.1.1 root addr=10.0.1.21 path=/exports/usiii 1000 Mbps FDX Link up Using BOOTP protocol: ip addr=10.0.1.82 hostname=usiii-bge0 netmask=255.255.255.0 gateway=10.0.1.1 root addr=10.0.1.21 path=/exports/usiii =0xc87b68 Loading netbsd: 8618464+555816+336840 [602688+396132]=0xdce5b0 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.5 (GENERIC) #0: Fri Apr 27 19:41:48 CEST 2012 kiers@yvresse.boppelans.net:/tmp/obj2293/sys/arch/sparc64/compile/GENERIC total memory = 16384 MB avail memory = 16079 MB mainbus0 (root): SUNW,Sun-Fire-V210 (Sun Fire V210): hostid 83739a6f cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1002 MHz, UPA id 0 cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1002 MHz, UPA id 1 cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) memory-controller at mainbus0 not configured memory-controller at mainbus0 not configured schizo0 at mainbus0: addr 4000ff00000: "Tomatillo", version 0, ign 7c0, bus B 0 to 0 schizo0: pci0 at schizo0 bge0 at pci0 dev 2 function 0: Broadcom BCM5704C Dual Gigabit Ethernet bge0: interrupting at ivec 37c8 bge0: ASIC BCM5704 A3 (0x2003), Ethernet address 00:03:ba:73:9a:6f brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1 at pci0 dev 2 function 1: Broadcom BCM5704C Dual Gigabit Ethernet bge1: interrupting at ivec 37c9 bge1: ASIC BCM5704 A3 (0x2003), Ethernet address 00:03:ba:73:9a:70 brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto schizo1 at mainbus0: addr 4000f600000: "Tomatillo", version 0, ign 780, bus A 0 to 0 schizo1: pci1 at schizo1 ebus0 at pci1 dev 7 function 0 ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00 flashprom at ebus0 addr 0-fffff, 290-290 not configured rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819p pcfiic0 at ebus0 addr 320-321 ipl 2e iic0 at pcfiic0: I2C bus i2c-bridge at iic0 addr 0x0b not configured i2c-bridge at iic0 addr 0x0c not configured motherboard-fru-prom at iic0 addr 0x51 not configured chassis-fru-prom at iic0 addr 0x54 not configured power-supply-fru-prom at iic0 addr 0x58 not configured spdmem0 at iic0 addr 0x5b spdmem0: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) spdmem1 at iic0 addr 0x5c spdmem1: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) spdmem2 at iic0 addr 0x5d spdmem2: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) spdmem3 at iic0 addr 0x5e spdmem3: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) spdmem4 at iic0 addr 0x63 spdmem4: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) spdmem5 at iic0 addr 0x64 spdmem5: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) spdmem6 at iic0 addr 0x65 spdmem6: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) spdmem7 at iic0 addr 0x66 spdmem7: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) rscrtc at iic0 addr 0x68 not configured nvram at iic0 addr 0x28 not configured idprom at iic0 addr 0x28 not configured gpio at iic0 addr 0x22 not configured gpio at iic0 addr 0x23 not configured gpio at iic0 addr 0x34 not configured gpio at iic0 addr 0x38 not configured power at ebus0 addr 800-82f ipl 20 not configured com0 at ebus0 addr 3f8-3ff ipl 2c: ns16550a, working fifo com0: console com1 at ebus0 addr 2e8-2ef ipl 2c: ns16550a, working fifo rmc-comm at ebus0 addr 3e8-3ef ipl 2c not configured alipm0 at pci1 dev 6 function 0: 223KHz clock iic1 at alipm0: I2C bus ohci0 at pci1 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci0: interrupting at ivec 7a7 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 aceride0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4) aceride0: using ivec 1f98 for native-PCI interrupt atabus0 at aceride0 channel 0 atabus1 at aceride0 channel 1 schizo2 at mainbus0: addr 4000e600000: "Tomatillo", version 0, ign 700, bus A 0 to 0 schizo2: pci2 at schizo2 esiop0 at pci2 dev 2 function 0: Symbios Logic 53c1010-66 (ultra3-wide scsi) esiop0: using on-board RAM esiop0: interrupting at ivec 1f29 scsibus0 at esiop0: 16 targets, 8 luns per target esiop1 at pci2 dev 2 function 1: Symbios Logic 53c1010-66 (ultra3-wide scsi) esiop1: using on-board RAM esiop1: interrupting at ivec 1f28 scsibus1 at esiop1: 16 targets, 8 luns per target schizo3 at mainbus0: addr 4000ef00000: "Tomatillo", version 0, ign 740, bus B 0 to 0 schizo3: pci3 at schizo3 bge2 at pci3 dev 2 function 0: Broadcom BCM5704C Dual Gigabit Ethernet bge2: interrupting at ivec 375c bge2: ASIC BCM5704 A3 (0x2003), Ethernet address 00:03:ba:73:9a:71 brgphy2 at bge2 phy 1: BCM5704 1000BASE-T media interface, rev. 0 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge3 at pci3 dev 2 function 1: Broadcom BCM5704C Dual Gigabit Ethernet bge3: interrupting at ivec 375d bge3: ASIC BCM5704 A3 (0x2003), Ethernet address 00:03:ba:73:9a:72 brgphy3 at bge3 phy 1: BCM5704 1000BASE-T media interface, rev. 0 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pcons at mainbus0 not configured No counter-timer -- using %tick at 1002MHz as system clock. scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... atapibus0 at atabus0: 2 targets uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 cd0 at atapibus0 drive 1: cdrom removable sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 70007 MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sect x 143374744 sectors sd0: sync (12.50ns offset 62), 16-bit (160.000MB/s) transfers, tagged queueing root on bge0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 10.0.1.21 nfs_boot: my_name=usiii-bge0 nfs_boot: my_domain=boppelans.net nfs_boot: my_addr=10.0.1.82 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=10.0.1.1 root on 10.0.1.21:/exports/usiii root file system type: nfs WARNING: clock lost 4896 days WARNING: using filesystem time WARNING: CHECK AND RESET THE DATE! Tue May 28 19:08:17 UTC 2013 Not checking /: fs_passno = 0 in /etc/fstab Starting file system checks: /dev/rsd0a: file system is clean; not checking mount: Unknown special file or file system `/var' Setting tty flags. ttyflags: open /dev/ttya: Permission denied ttyflags: open /dev/ttyb: Permission denied ttyflags: open /dev/ttyh0: Permission denied ttyflags: open /dev/ttyh1: Permission denied Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. Hostname: usiii.boppelans.net IPv6 mode: autoconfigured host Configuring network interfaces:. Adding interface aliases:. mount: Unknown special file or file system `/usr' /etc/rc.d/mountcritremote exited with code 1 Building databases: dev, utmp, utmpx, services. Starting syslogd. Setting date via ntp. Mounting all filesystems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. Checking for core dump... savecore: no core dump (no dumpdev) Starting local daemons:offlining cpu 1 . Updating motd. Starting sshd. Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/mountcritremote See /var/run/rc.log for more information. Tue May 28 19:08:38 UTC 2013 NetBSD/sparc64 (usiii.boppelans.net) (console) login: