Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.1_STABLE (GENERIC) #0: Thu Mar 13 12:30:49 CET 2014 kiers@yvresse.boppelans.net:/tmp/obj25734/sys/arch/amd64/compile/GENERIC total memory = 4053 MB avail memory = 3920 MB timecounter: Timecounters tick every 10.000 msec RTC BIOS diagnostic error 0x3f timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Dell Inc. OptiPlex 990 (01) mainbus0 (root) ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40, using 32 (20110623/tbfadt-517) cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, id 0x206a7 cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, id 0x206a7 cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, id 0x206a7 cpu3 at mainbus0 apid 6: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, id 0x206a7 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 FWHD (INT0800) at acpi0 not configured LDRC (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 CWDT (INT3F0D) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured PDRC (PNP0C02) at acpi0 not configured MEM2 (PNP0C01) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0100 (rev. 0x09) vendor 0x8086 product 0x1c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured puc0 at pci0 dev 22 function 3: Intel 6 Series KT (com) com2 at puc0 port 0: interrupting at ioapic0 pin 17 com2: ns16550a, working fifo wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04) wm0: interrupting at ioapic0 pin 20 wm0: PCI-Express bus wm0: FLASH get hw control (1) wm0: Ethernet address 78:2b:cb:a4:57:b3 ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3 ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1c2d (rev. 0x04) ehci0: interrupting at ioapic0 pin 16 ehci0: EHCI version 1.0 usb0 at ehci0: USB revision 2.0 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 22 hdafg0 at hdaudio0: Realtek ALC269 hdafg0: DAC00 2ch: Speaker [Built-In] hdafg0: DAC01 2ch: Speaker [Jack], HP Out [Jack] hdafg0: ADC02 2ch: Mic In [Jack] hdafg0: ADC03 2ch: Mic In [Jack] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: full duplex, playback, capture, independent ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x1c10 (rev. 0xb4) ppb0: PCI Express 2.0 pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 28 function 2: vendor 0x8086 product 0x1c14 (rev. 0xb4) ppb1: PCI Express 2.0 pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x1c18 (rev. 0xb4) ppb2: PCI Express 2.0 pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok vga0 at pci3 dev 0 function 0: vendor 0x1002 product 0x94c3 (rev. 0x00) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 radeondrm0 at vga0: Radeon HD 2400 Pro radeondrm0: Initialized radeon 1.29.0 20080613 ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1c26 (rev. 0x04) ehci1: interrupting at ioapic0 pin 17 ehci1: EHCI version 1.0 usb1 at ehci1: USB revision 2.0 ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa4) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1c4e (rev. 0x04) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1c02 (rev. 0x04) ahcisata0: interrupting at ioapic0 pin 18 ahcisata0: 64-bit DMA ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe730ff45 atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x1c22 (rev. 0x04) ichsmb0: interrupting at ioapic0 pin 18 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 lpt0 at isa0 port 0x378-0x37b irq 7 tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev 0x4e com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 attimer1: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 1 us, pow 1000 mW acpicpu0: C2: FFH, lat 80 us, pow 500 mW acpicpu0: C3: FFH, lat 104 us, pow 350 mW acpicpu0: P0: FFH, lat 10 us, pow 95000 mW, 3101 MHz, turbo boost acpicpu0: P1: FFH, lat 10 us, pow 95000 mW, 3100 MHz acpicpu0: P2: FFH, lat 10 us, pow 74419 mW, 2600 MHz acpicpu0: P3: FFH, lat 10 us, pow 67443 mW, 2400 MHz acpicpu0: P4: FFH, lat 10 us, pow 59864 mW, 2200 MHz acpicpu0: P5: FFH, lat 10 us, pow 53437 mW, 2000 MHz acpicpu0: P6: FFH, lat 10 us, pow 47257 mW, 1800 MHz acpicpu0: P7: FFH, lat 10 us, pow 40536 mW, 1600 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % coretemp0 at cpu0: thermal sensor, 1 C resolution acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution acpicpu2 at cpu2: ACPI CPU coretemp2 at cpu2: thermal sensor, 1 C resolution acpicpu3 at cpu3: ACPI CPU coretemp3 at cpu3: thermal sensor, 1 C resolution timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 3093089320 Hz quality 3000 uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ahcisata0 port 0: device present, speed: 6.0Gb/s ahcisata0 port 1: device present, speed: 1.5Gb/s wd0 at atabus0 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) atapibus0 at atabus1: 1 targets cd0 at atapibus0 drive 0: cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2 uhub2: single transaction translator uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2 uhub3: single transaction translator uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered uhub4 at uhub3 port 2: vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 3 uhub4: multiple transaction translators uhub4: 4 ports with 3 removable, self powered umass0 at uhub2 port 3 configuration 1 interface 0 umass0: SanDisk Extreme, rev 2.10/0.10, addr 3 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk fixed sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Logical Unit Is in Process Of Becoming Ready sd0: drive offline sd0: fabricating a geometry uhidev0 at uhub3 port 5 configuration 1 interface 0 uhidev0: Dell Dell USB Keyboard, rev 1.10/3.06, addr 4, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex, playback, capture boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs cprng sysctl: WARNING pseudorandom rekeying. wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) info: [drm] Setting GART location based on new memory map info: [drm] Loading RV610 Microcode info: [drm] Resetting GPU info: [drm] writeback test succeeded in 2 usecs radeondrm0: interrupting at ioapic0 pin 16 uhidev1 at uhub3 port 7 configuration 1 interface 0 uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 5, iclass 3/1 ums0 at uhidev1: 4 buttons and Z dir wsmouse0 at ums0 mux 0