Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.20 (XEN3_DOM0) #0: Tue May 28 11:48:19 CEST 2013 kiersb@bertxentoy.xs4all.net:/tmp/obj25127/sys/arch/amd64/compile/XEN3_DOM0 total memory = 1536 MB avail memory = 1471 MB timecounter: Timecounters tick every 10.000 msec mainbus0 (root) cpu0 at mainbus0 apid 0 cpu1 at mainbus0 apid 4 cpu2 at mainbus0 apid 1 cpu3 at mainbus0 apid 5 cpu4 at mainbus0 apid 2 cpu5 at mainbus0 apid 6 cpu6 at mainbus0 apid 3 cpu7 at mainbus0 apid 7 ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0 apid 9: pa 0xfec80000, version 20, 24 pins ipmi0 at mainbus0 hypervisor0 at mainbus0: Xen version 4.2.2 VIRQ_DEBUG interrupt using event channel 1 vcpu0 at hypervisor0: Intel(R) Xeon(R) CPU L5420 @ 2.50GHz, id 0x1067a xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xencons0: console major 143, unit 0 xencons0: using event channel 2 acpi0 at hypervisor0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId , AslId < LTP,00000000> acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 MBRD (PNP0C02) at acpi0 not configured HPET (PNP0103) at acpi0 not configured pcppi0 at acpi0 (SPKR, PNP0800): io 0x61 TIME (PNP0100) at acpi0 not configured FWHD (INT0800) at acpi0 not configured pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12 COM1 (PNP0501) at acpi0 not configured COM2 (PNP0501) at acpi0 not configured FDC (PNP0700) at acpi0 not configured SIM0 (IPI0001) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at hypervisor0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x25d8 (rev. 0xb1) ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0xb1) ppb0: PCI Express 1.0 x8 @ 2.5Gb/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01) ppb1: PCI Express 1.0 pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01) ppb2: PCI Express 1.0 x4 @ 2.5Gb/s pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled ppb3 at pci2 dev 1 function 0: vendor 0x8086 product 0x3514 (rev. 0x01) ppb3: PCI Express 1.0 x4 @ 2.5Gb/s pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled ppb4 at pci2 dev 2 function 0: vendor 0x8086 product 0x3518 (rev. 0x01) ppb4: PCI Express 1.0 x4 @ 2.5Gb/s pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled wm0 at pci5 dev 0 function 0: i80003 dual 1000baseT Ethernet (rev. 0x01) wm0: interrupting at ioapic0 pin 18, event channel 6 wm0: PCI-Express bus wm0: 65536 word (16 address bits) SPI EEPROM wm0: Ethernet address 00:30:48:c8:2f:5e ikphy0 at wm0 phy 1: i82563 10/100/1000 media interface, rev. 2 ikphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci5 dev 0 function 1: i80003 dual 1000baseT Ethernet (rev. 0x01) wm1: interrupting at ioapic0 pin 19, event channel 7 wm1: PCI-Express bus wm1: 65536 word (16 address bits) SPI EEPROM wm1: Ethernet address 00:30:48:c8:2f:5f ikphy1 at wm1 phy 1: i82563 10/100/1000 media interface, rev. 2 ikphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb5 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01) ppb5: PCI Express 1.0 pci6 at ppb5 bus 6 pci6: i/o space, memory space enabled ppb6 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0xb1) ppb6: PCI Express 1.0 x8 @ 2.5Gb/s pci7 at ppb6 bus 7 pci7: i/o space, memory space enabled ppb7 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0xb1) ppb7: PCI Express 1.0 x8 @ 2.5Gb/s pci8 at ppb7 bus 8 pci8: i/o space, memory space enabled arcmsr0 at pci8 dev 0 function 0 arcmsr0: interrupting at ioapic0 pin 18, event channel 6 arcmsr0: Areca ARC-1222 Host Adapter RAID controller arcmsr0: 8 ports, 256MB SDRAM, firmware scsibus0 at arcmsr0: 16 targets, 8 luns per target vendor 0x8086 product 0x1a38 (miscellaneous system, revision 0xb1) at pci0 dev 8 function 0 not configured pchb1 at pci0 dev 16 function 0: vendor 0x8086 product 0x25f0 (rev. 0xb1) pchb2 at pci0 dev 16 function 1: vendor 0x8086 product 0x25f0 (rev. 0xb1) pchb3 at pci0 dev 16 function 2: vendor 0x8086 product 0x25f0 (rev. 0xb1) pchb4 at pci0 dev 17 function 0: vendor 0x8086 product 0x25f1 (rev. 0xb1) pchb5 at pci0 dev 19 function 0: vendor 0x8086 product 0x25f3 (rev. 0xb1) pchb6 at pci0 dev 21 function 0: vendor 0x8086 product 0x25f5 (rev. 0xb1) pchb7 at pci0 dev 22 function 0: vendor 0x8086 product 0x25f6 (rev. 0xb1) uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09) uhci0: interrupting at ioapic0 pin 17, event channel 8 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09) uhci1: interrupting at ioapic0 pin 19, event channel 7 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09) uhci2: interrupting at ioapic0 pin 18, event channel 6 usb2 at uhci2: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09) ehci0: interrupting at ioapic0 pin 17, event channel 8 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 ppb8 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9) pci9 at ppb8 bus 9 pci9: i/o space, memory space enabled vga0 at pci9 dev 1 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 wsmux1: connecting to wsdisplay0 pckbd_enable: command error drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2670 (rev. 0x09) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. piixide0 at pci0 dev 31 function 1: Intel 631xESB/632xESB IDE Controller (rev. 0x09) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14, event channel 9 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) vendor 0x8086 product 0x269b (SMBus serial bus, revision 0x09) at pci0 dev 31 function 3 not configured isa0 at ichlpcib0 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000 Xen clock: using event channel 11 xenbus0: using event channel 12 atapibus0 at atabus0: 2 targets sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 149 GB, 54253 cyl, 12 head, 480 sec, 512 bytes/sect x 312499200 sectors cd0 at atapibus0 drive 1: cdrom removable sd1 at scsibus0 target 0 lun 1: disk fixed sd1: 1862 GB, 63578 cyl, 128 head, 480 sec, 512 bytes/sect x 3906249216 sectors cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA) uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered arcmsr0: unable to query firmware for sensor info ehci0: handing over full speed device on port 6 to uhci2 Kernelized RAIDframe activated boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs umass0 at uhub2 port 2 configuration 1 interface 0 umass0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, 1 lun per target uhidev0 at uhub2 port 2 configuration 1 interface 1 sd2 at scsibus1 target 0 lun 0: disk removable uhidev0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/0 ums0 at uhidev0: 3 buttons and Z dir wsmouse1 at ums0 mux 0 uhidev1 at uhub2 port 2 configuration 1 interface 2 sd2: drive offline uhidev1: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes sd2: unable to open device, error = 19 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 ipmi0: critical limit on 'Intrusion' ipmi0: warning under limit on 'Fan7' ipmi0: warning under limit on 'Fan6' ipmi0: warning under limit on 'Fan5' ipmi0: critical over limit on '-12V' wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)