Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.0.1 (GENERIC) total memory = 3062 MB avail memory = 2999 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Supermicro P8SGA (1234567890) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 3.00GHz, id 0xf43 cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) 4 CPU 3.00GHz, id 0xf43 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button SYSR (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 FDC0 (PNP0700) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured UAR2 (PNP0501) at acpi0 not configured PMIO (PNP0C02) at acpi0 not configured FWH (INT0800) at acpi0 not configured EXPL (PNP0C02) at acpi0 not configured MEM (PNP0C01) at acpi0 not configured acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan acpitz0 at acpi0 (THRM): cpu0 acpitz0: active cooling level 0: 75.0C acpitz0: levels: critical 100.0 C, passive 75.0 C apm0 at acpi0: Power Management spec V1.2 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2580 (rev. 0x0e) agp0 at pchb0: detected 7932k stolen memory agp0: aperture at 0xc0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2581 (rev. 0x0e) ppb0: PCI Express 1.0 pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci1 dev 0 function 0: vendor 0x111d product 0x8018 (rev. 0x04) ppb1: PCI Express 1.0 pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci2 dev 0 function 0: vendor 0x111d product 0x8018 (rev. 0x04) ppb2: PCI Express 1.0 pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok wm0 at pci3 dev 0 function 0: Intel PRO/1000 QT (82571EB) (rev. 0x06) wm0: interrupting at ioapic0 pin 16 wm0: PCI-Express bus wm0: 65536 word (16 address bits) SPI EEPROM wm0: Ethernet address 00:15:17:d2:6b:9c igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci3 dev 0 function 1: Intel PRO/1000 QT (82571EB) (rev. 0x06) wm1: interrupting at ioapic0 pin 17 wm1: PCI-Express bus wm1: 65536 word (16 address bits) SPI EEPROM wm1: Ethernet address 00:15:17:d2:6b:9d igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb3 at pci2 dev 1 function 0: vendor 0x111d product 0x8018 (rev. 0x04) ppb3: PCI Express 1.0 pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok wm2 at pci4 dev 0 function 0: Intel PRO/1000 QT (82571EB) (rev. 0x06) wm2: interrupting at ioapic0 pin 17 wm2: PCI-Express bus wm2: 65536 word (16 address bits) SPI EEPROM wm2: Ethernet address 00:15:17:d2:6b:9e igphy2 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 igphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm3 at pci4 dev 0 function 1: Intel PRO/1000 QT (82571EB) (rev. 0x06) wm3: interrupting at ioapic0 pin 18 wm3: PCI-Express bus wm3: 65536 word (16 address bits) SPI EEPROM wm3: Ethernet address 00:15:17:d2:6b:9f igphy3 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 igphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2582 (rev. 0x0e) wsdisplay0 at vga1 kbdmux 1 wsmux1: connecting to wsdisplay0 i915drm0 at vga1: Intel i915G i915drm0: AGP at 0xc0000000 256MB i915drm0: Initialized i915 1.6.0 20080730 ppb4 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x03) ppb4: PCI Express 1.0 pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled, rd/line, wr/inv ok ppb5 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x03) ppb5: PCI Express 1.0 pci6 at ppb5 bus 6 pci6: i/o space, memory space enabled, rd/line, wr/inv ok wm4 at pci6 dev 0 function 0: Intel i82574L (rev. 0x00) wm4: interrupting at ioapic0 pin 17 wm4: PCI-Express bus wm4: FLASH wm4: Ethernet address 00:1b:21:4e:91:fb ukphy0 at wm4 phy 1: OUI 0x000ac2, model 0x000b, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x03) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x03) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x03) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x03) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x03) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb6 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd3) pci7 at ppb6 bus 7 pci7: i/o space, memory space enabled wm5 at pci7 dev 1 function 0: Intel i82546GB 1000BASE-X Ethernet (rev. 0x03) wm5: interrupting at ioapic0 pin 21 wm5: 32-bit 33MHz PCI bus wm5: 256 word (8 address bits) MicroWire EEPROM wm5: Ethernet address 00:04:23:ae:4d:86 wm5: 1000baseSX, 1000baseSX-FDX, auto wm6 at pci7 dev 1 function 1: Intel i82546GB 1000BASE-X Ethernet (rev. 0x03) wm6: interrupting at ioapic0 pin 22 wm6: 32-bit 33MHz PCI bus wm6: 256 word (8 address bits) MicroWire EEPROM wm6: Ethernet address 00:04:23:ae:4d:87 wm6: 1000baseSX, 1000baseSX-FDX, auto wm7 at pci7 dev 11 function 0: Intel i82541GI 1000BASE-T Ethernet (rev. 0x00) wm7: interrupting at ioapic0 pin 19 wm7: 32-bit 33MHz PCI bus wm7: 64 word (6 address bits) MicroWire EEPROM wm7: Ethernet address 00:30:48:88:aa:65 igphy4 at wm7 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 igphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio auich0: interrupting at ioapic0 pin 17 auich0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D auich0: ac97: ext id 0x5c7 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2640 (rev. 0x03) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. gpio0 at ichlpcib0: 64 pins piixide0 at pci0 dev 31 function 2: Intel 82801FB Serial ATA/Raid Controller (rev. 0x03) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x03) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu0: P0: I/O, lat 160 us, pow 0 mW, 3000 MHz acpicpu1 at cpu1: ACPI CPU timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 3000306370 Hz quality 3000 auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz audio0 at auich0: full duplex, playback, capture, mmap, independent fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered wd0 at atabus0 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) Kernelized RAIDframe activated boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)