Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.0_BETA (GENERIC) #0: Fri Nov 10 13:38:03 CET 2017 kiers@yvresse.boppelans.net:/disk1/kiersextra/netbsd-8/obj/sys/arch/amd64/compile/GENERIC total memory = 49143 MB avail memory = 47695 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done No bootinfo commands at boot timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 efi: missing or invalid systbl SMBIOS rev. 2.6 @ 0x99c00 (95 entries) Supermicro X8DTU (1234567890) mainbus0 (root) efi: missing or invalid systbl ACPI: RSDP 0x00000000000FA640 000024 (v02 ACPIAM) ACPI: XSDT 0x00000000BF790100 00008C (v01 SMCI 20091005 MSFT 00000097) ACPI: FACP 0x00000000BF790290 0000F4 (v03 100509 FACP1349 20091005 MSFT 00000097) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170303/tbfadt-642) ACPI: DSDT 0x00000000BF790630 00630F (v01 10600 10600000 00000000 INTL 20051117) ACPI: FACS 0x00000000BF79E000 000040 ACPI: FACS 0x00000000BF79E000 000040 ACPI: APIC 0x00000000BF790390 0000DE (v01 100509 APIC1349 20091005 MSFT 00000097) ACPI: MCFG 0x00000000BF790470 00003C (v01 100509 OEMMCFG 20091005 MSFT 00000097) ACPI: SLIC 0x00000000BF7904B0 000176 (v01 SMCI 20091005 MSFT 00000097) ACPI: OEMB 0x00000000BF79E040 00007D (v01 100509 OEMB1349 20091005 MSFT 00000097) ACPI: SRAT 0x00000000BF79A630 0001D0 (v01 100509 OEMSRAT 00000001 INTL 00000001) ACPI: HPET 0x00000000BF79A800 000038 (v01 100509 OEMHPET 20091005 MSFT 00000097) ACPI: DMAR 0x00000000BF79E0C0 000138 (v01 AMI OEMDMAR 00000001 MSFT 00000097) ACPI: SSDT 0x00000000BF7A12F0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: EINJ 0x00000000BF79A840 000130 (v01 AMIER AMI_EINJ 20091005 MSFT 00000097) ACPI: BERT 0x00000000BF79A9D0 000030 (v01 AMIER AMI_BERT 20091005 MSFT 00000097) ACPI: ERST 0x00000000BF79AA00 0001B0 (v01 AMIER AMI_ERST 20091005 MSFT 00000097) ACPI: HEST 0x00000000BF79ABB0 0000A8 (v01 AMIER ABC_HEST 20091005 MSFT 00000097) ACPI: Executed 1 blocks of module-level executable AML code ACPI: 2 ACPI AML tables successfully acquired and loaded efi: missing or invalid systbl ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins ioapic1 at mainbus0 apid 9: pa 0xfec8a000, version 0x20, 24 pins cpu0 at mainbus0 apid 0 cpu0: 8 page colors cpu0: calibrating local timer cpu0: apic clock running at 133 MHz timecounter: Timecounter "lapic" frequency 133392908 Hz quality -100 cpu0: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu0: package 0, core 0, smt 0 cpu0: PAT enabled cpu1 at mainbus0 apid 2 cpu1: 2 page colors i82489_ipi_init: ESR 00000040 cpu1: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu1: package 0, core 1, smt 0 cpu1: PAT enabled cpu2 at mainbus0 apid 4 cpu2: 2 page colors cpu2: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu2: package 0, core 2, smt 0 cpu2: PAT enabled cpu3 at mainbus0 apid 6 cpu3: 2 page colors cpu3: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu3: package 0, core 3, smt 0 cpu3: PAT enabled cpu4 at mainbus0 apid 16 cpu4: 2 page colors cpu4: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu4: package 1, core 0, smt 0 cpu4: PAT enabled cpu5 at mainbus0 apid 18 cpu5: 2 page colors cpu5: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu5: package 1, core 1, smt 0 cpu5: PAT enabled cpu6 at mainbus0 apid 20 cpu6: 2 page colors cpu6: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu6: package 1, core 2, smt 0 cpu6: PAT enabled cpu7 at mainbus0 apid 22 cpu7: 2 page colors cpu7: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu7: package 1, core 3, smt 0 cpu7: PAT enabled cpu8 at mainbus0 apid 1 cpu8: 2 page colors cpu8: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu8: package 0, core 0, smt 1 cpu8: PAT enabled cpu9 at mainbus0 apid 3 cpu9: 2 page colors cpu9: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu9: package 0, core 1, smt 1 cpu9: PAT enabled cpu10 at mainbus0 apid 5 cpu10: 2 page colors cpu10: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu10: package 0, core 2, smt 1 cpu10: PAT enabled cpu11 at mainbus0 apid 7 cpu11: 2 page colors cpu11: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu11: package 0, core 3, smt 1 cpu11: PAT enabled cpu12 at mainbus0 apid 17 cpu12: 2 page colors cpu12: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu12: package 1, core 0, smt 1 cpu12: PAT enabled cpu13 at mainbus0 apid 19 cpu13: 2 page colors cpu13: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu13: package 1, core 1, smt 1 cpu13: PAT enabled cpu14 at mainbus0 apid 21 cpu14: 2 page colors cpu14: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu14: package 1, core 2, smt 1 cpu14: PAT enabled cpu15 at mainbus0 apid 23 cpu15: 2 page colors cpu15: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz, id 0x106a5 cpu15: package 1, core 3, smt 1 cpu15: PAT enabled acpi0 at mainbus0: Intel ACPICA 20170303 efi: missing or invalid systbl acpi0: X/RSDT: OemId , AslId allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96 acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 MCFG: MEMMAP: 0x0000000000000000-0x00000000000997ff, size=0x0000000000099800, type=1(Memory) MCFG: MEMMAP: 0x0000000000099800-0x000000000009ffff, size=0x0000000000006800, type=2(Reserved) MCFG: MEMMAP: 0x00000000000e0000-0x00000000000fffff, size=0x0000000000020000, type=2(Reserved) MCFG: MEMMAP: 0x0000000000100000-0x00000000bf77ffff, size=0x00000000bf680000, type=1(Memory) MCFG: MEMMAP: 0x00000000bf78e000-0x00000000bf78ffff, size=0x0000000000002000, type=9(unknown) MCFG: MEMMAP: 0x00000000bf790000-0x00000000bf79dfff, size=0x000000000000e000, type=3(ACPI) MCFG: MEMMAP: 0x00000000bf79e000-0x00000000bf7cffff, size=0x0000000000032000, type=4(NVS) MCFG: MEMMAP: 0x00000000bf7d0000-0x00000000bf7dffff, size=0x0000000000010000, type=2(Reserved) MCFG: MEMMAP: 0x00000000bf7ec000-0x00000000bf7fffff, size=0x0000000000014000, type=2(Reserved) MCFG: MEMMAP: 0x00000000bf800000-0x00000000bfffffff, size=0x0000000000800000, type=2(Reserved) MCFG: MEMMAP: 0x00000000e0000000-0x00000000efffffff, size=0x0000000010000000, type=2(Reserved) acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF80005766E000 002774 (v01 DpgPmm P001Ist 00000011 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFFE8157C76010 000961 (v01 PmRef P001Cst 00003001 INTL 20051117) acpi0: SCI interrupting at int 9 acpi0: fixed power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 acpi0: ACPI-Fast 24-bit timer hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 IOH (PNP0C01) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 spkr0 at pcppi1: PC Speaker midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 SIOR (PNP0C02) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured UAR2 (PNP0501) at acpi0 not configured RMSC (PNP0C02) at acpi0 not configured OMSC (PNP0C02) at acpi0 not configured PCIE (PNP0C02) at acpi0 not configured RMEM (PNP0C01) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button ACPI: Enabled 1 GPEs in block 00 to 3F attimer1: attached to pcppi1 ipmi0 at mainbus0 ipmi0: WARNING: power management not supported pci0 at mainbus0 bus 0: configuration mode 1 acpi0: MCFG: 000:00:0: Ok (cfg[0x100]=0x15010001) acpi0: MCFG: 000:01:0: Ok (cfg[0x100]=0x15010001) acpi0: MCFG: 000:03:0: Ok (cfg[0x100]=0x15010001) acpi0: MCFG: 000:05:0: Ok (cfg[0x100]=0x15010001) acpi0: MCFG: 000:06:0: Ok (cfg[0x100]=0x15010001) acpi0: MCFG: 000:07:0: Ok (cfg[0x100]=0x15010001) acpi0: MCFG: 000:09:0: Ok (cfg[0x100]=0x15010001) acpi0: MCFG: 000:19:0: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:20:0: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:20:1: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:20:2: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:20:3: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:22:0: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:22:1: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:22:2: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:22:3: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:22:4: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:22:5: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:22:6: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:22:7: invalid config space (cfg[0x100]=0x00000000, alias=false) acpi0: MCFG: 000:26:0: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:26:1: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:26:2: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:26:7: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:29:0: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:29:1: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:29:2: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:29:7: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:30:0: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:31:0: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:31:2: invalid config space (cfg[0x100]=0x3a208086, alias=true) acpi0: MCFG: 000:31:3: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: 000:31:5: invalid config space (cfg[0x100]=0x3a268086, alias=true) acpi0: MCFG: bus 0: valid devices acpi0: MCFG: 000:00:0 acpi0: MCFG: 000:01:0 acpi0: MCFG: 000:03:0 acpi0: MCFG: 000:05:0 acpi0: MCFG: 000:06:0 acpi0: MCFG: 000:07:0 acpi0: MCFG: 000:09:0 acpi0: acpimcfg_map_bus done pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: vendor 8086 product 3408 (rev. 0x13) ppb0: PCI Express capability version 2 x4 @ 5.0GT/s ppb0: link is x4 @ 2.5GT/s pci1 at ppb0 bus 1 acpi0: MCFG: 001:00:0: Ok (cfg[0x100]=0x14010001) acpi0: MCFG: 001:00:1: Ok (cfg[0x100]=0x14010001) acpi0: MCFG: bus 1: valid devices acpi0: MCFG: 001:00:0 acpi0: MCFG: 001:00:1 acpi0: acpimcfg_map_bus done pci1: i/o space, memory space enabled, rd/line, wr/inv ok wm0 at pci1 dev 0 function 0: 82576 1000BaseT Ethernet (rev. 0x01) allocated pic msix0 type edge pin 0 level 6 to cpu0 slot 16 idt entry 97 wm0: for TX and RX interrupting at msix0 vec 0 affinity to 1 allocated pic msix0 type edge pin 1 level 6 to cpu0 slot 16 idt entry 98 wm0: for TX and RX interrupting at msix0 vec 1 affinity to 2 allocated pic msix0 type edge pin 2 level 6 to cpu0 slot 16 idt entry 99 wm0: for TX and RX interrupting at msix0 vec 2 affinity to 3 allocated pic msix0 type edge pin 3 level 6 to cpu0 slot 16 idt entry 100 wm0: for TX and RX interrupting at msix0 vec 3 affinity to 4 allocated pic msix0 type edge pin 4 level 6 to cpu0 slot 16 idt entry 101 wm0: for TX and RX interrupting at msix0 vec 4 affinity to 5 allocated pic msix0 type edge pin 5 level 6 to cpu0 slot 16 idt entry 102 wm0: for TX and RX interrupting at msix0 vec 5 affinity to 6 allocated pic msix0 type edge pin 6 level 6 to cpu0 slot 16 idt entry 103 wm0: for TX and RX interrupting at msix0 vec 6 affinity to 7 allocated pic msix0 type edge pin 7 level 6 to cpu0 slot 16 idt entry 104 wm0: for TX and RX interrupting at msix0 vec 7 affinity to 8 allocated pic msix0 type edge pin 8 level 6 to cpu0 slot 16 idt entry 105 wm0: for TX and RX interrupting at msix0 vec 8 affinity to 9 allocated pic msix0 type edge pin 9 level 6 to cpu0 slot 16 idt entry 106 wm0: for LINK interrupting at msix0 vec 9 wm0: PCI-Express bus wm0: 16384 words (16 address bits) SPI EEPROM, version 1.43, Image Unique ID e6060000 wm0: Ethernet address 00:30:48:9e:a9:2e wm0: Copper wm0: 0x174440 igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 1 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci1 dev 0 function 1: 82576 1000BaseT Ethernet (rev. 0x01) allocated pic msix1 type edge pin 0 level 6 to cpu0 slot 17 idt entry 107 wm1: for TX and RX interrupting at msix1 vec 0 affinity to 1 allocated pic msix1 type edge pin 1 level 6 to cpu0 slot 17 idt entry 108 wm1: for TX and RX interrupting at msix1 vec 1 affinity to 2 allocated pic msix1 type edge pin 2 level 6 to cpu0 slot 17 idt entry 109 wm1: for TX and RX interrupting at msix1 vec 2 affinity to 3 allocated pic msix1 type edge pin 3 level 6 to cpu0 slot 17 idt entry 110 wm1: for TX and RX interrupting at msix1 vec 3 affinity to 4 allocated pic msix1 type edge pin 4 level 6 to cpu0 slot 17 idt entry 111 wm1: for TX and RX interrupting at msix1 vec 4 affinity to 5 allocated pic msix1 type edge pin 5 level 6 to cpu0 slot 17 idt entry 112 wm1: for TX and RX interrupting at msix1 vec 5 affinity to 6 allocated pic msix1 type edge pin 6 level 6 to cpu0 slot 17 idt entry 113 wm1: for TX and RX interrupting at msix1 vec 6 affinity to 7 allocated pic msix1 type edge pin 7 level 6 to cpu0 slot 17 idt entry 114 wm1: for TX and RX interrupting at msix1 vec 7 affinity to 8 allocated pic msix1 type edge pin 8 level 6 to cpu0 slot 17 idt entry 115 wm1: for TX and RX interrupting at msix1 vec 8 affinity to 9 allocated pic msix1 type edge pin 9 level 6 to cpu0 slot 17 idt entry 116 wm1: for LINK interrupting at msix1 vec 9 wm1: PCI-Express bus wm1: 16384 words (16 address bits) SPI EEPROM, version 1.43, Image Unique ID e6060000 wm1: Ethernet address 00:30:48:9e:a9:2f wm1: Copper wm1: 0x74440 igphy1 at wm1 phy 1: i82566 10/100/1000 media interface, rev. 1 igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb1 at pci0 dev 3 function 0: vendor 8086 product 340a (rev. 0x13) ppb1: PCI Express capability version 2 x8 @ 5.0GT/s pci2 at ppb1 bus 3 acpi0: MCFG: bus 3: no valid devices. acpi0: acpimcfg_map_bus done pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 5 function 0: vendor 8086 product 340c (rev. 0x13) ppb2: PCI Express capability version 2 x4 @ 5.0GT/s pci3 at ppb2 bus 4 acpi0: MCFG: bus 4: no valid devices. acpi0: acpimcfg_map_bus done pci3: i/o space, memory space enabled, rd/line, wr/inv ok ppb3 at pci0 dev 6 function 0: vendor 8086 product 340d (rev. 0x13) ppb3: PCI Express capability version 2 x4 @ 5.0GT/s pci4 at ppb3 bus 5 acpi0: MCFG: bus 5: no valid devices. acpi0: acpimcfg_map_bus done pci4: i/o space, memory space enabled, rd/line, wr/inv ok ppb4 at pci0 dev 7 function 0: vendor 8086 product 340e (rev. 0x13) ppb4: PCI Express capability version 2 x8 @ 5.0GT/s ppb4: link is x8 @ 2.5GT/s pci5 at ppb4 bus 6 acpi0: MCFG: 006:00:0: Ok (cfg[0x100]=0x00010001) acpi0: MCFG: bus 6: valid devices acpi0: MCFG: 006:00:0 acpi0: acpimcfg_map_bus done pci5: i/o space, memory space enabled, rd/line, wr/inv ok pci_mem_find: void region arcmsr0 at pci5 dev 0 function 0allocated pic ioapic1 type level pin 6 level 6 to cpu0 slot 1 idt entry 117 arcmsr0: interrupting at ioapic1 pin 6 arcmsr0: Areca ARC-1680 Host Adapter RAID controller arcmsr0: 8 ports, 512MB SDRAM, firmware scsibus0 at arcmsr0: 16 targets, 8 luns per target ppb5 at pci0 dev 9 function 0: vendor 8086 product 3410 (rev. 0x13) ppb5: PCI Express capability version 2 x8 @ 5.0GT/s pci6 at ppb5 bus 7 acpi0: MCFG: bus 7: no valid devices. acpi0: acpimcfg_map_bus done pci6: i/o space, memory space enabled, rd/line, wr/inv ok vendor 8086 product 342d (interrupt system, IO(x) APIC, revision 0x13) at pci0 dev 19 function 0 not configured vendor 8086 product 342e (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured vendor 8086 product 3422 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured vendor 8086 product 3423 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured vendor 8086 product 3438 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 3 not configured vendor 8086 product 3430 (miscellaneous system, revision 0x13) at pci0 dev 22 function 0 not configured vendor 8086 product 3431 (miscellaneous system, revision 0x13) at pci0 dev 22 function 1 not configured vendor 8086 product 3432 (miscellaneous system, revision 0x13) at pci0 dev 22 function 2 not configured vendor 8086 product 3433 (miscellaneous system, revision 0x13) at pci0 dev 22 function 3 not configured vendor 8086 product 3429 (miscellaneous system, revision 0x13) at pci0 dev 22 function 4 not configured vendor 8086 product 342a (miscellaneous system, revision 0x13) at pci0 dev 22 function 5 not configured vendor 8086 product 342b (miscellaneous system, revision 0x13) at pci0 dev 22 function 6 not configured vendor 8086 product 342c (miscellaneous system, revision 0x13) at pci0 dev 22 function 7 not configured uhci0 at pci0 dev 26 function 0: vendor 8086 product 3a37 (rev. 0x00) allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 2 idt entry 118 uhci0: interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 usb0: WARNING: power management not supported uhci1 at pci0 dev 26 function 1: vendor 8086 product 3a38 (rev. 0x00) allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 3 idt entry 119 uhci1: interrupting at ioapic0 pin 21 usb1 at uhci1: USB revision 1.0 usb1: WARNING: power management not supported uhci2 at pci0 dev 26 function 2: vendor 8086 product 3a39 (rev. 0x00) allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 4 idt entry 120 uhci2: interrupting at ioapic0 pin 19 usb2 at uhci2: USB revision 1.0 usb2: WARNING: power management not supported ehci0 at pci0 dev 26 function 7: vendor 8086 product 3a3c (rev. 0x00) allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 121 ehci0: interrupting at ioapic0 pin 18 ehci0: EHCI version 1.0 ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 usb3: WARNING: power management not supported uhci3 at pci0 dev 29 function 0: vendor 8086 product 3a34 (rev. 0x00) allocated pic ioapic0 type level pin 23 level 6 to cpu0 slot 6 idt entry 122 uhci3: interrupting at ioapic0 pin 23 usb4 at uhci3: USB revision 1.0 usb4: WARNING: power management not supported uhci4 at pci0 dev 29 function 1: vendor 8086 product 3a35 (rev. 0x00) allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 4 idt entry 120 uhci4: interrupting at ioapic0 pin 19 usb5 at uhci4: USB revision 1.0 usb5: WARNING: power management not supported uhci5 at pci0 dev 29 function 2: vendor 8086 product 3a36 (rev. 0x00) allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 121 uhci5: interrupting at ioapic0 pin 18 usb6 at uhci5: USB revision 1.0 usb6: WARNING: power management not supported ehci1 at pci0 dev 29 function 7: vendor 8086 product 3a3a (rev. 0x00) allocated pic ioapic0 type level pin 23 level 6 to cpu0 slot 6 idt entry 122 ehci1: interrupting at ioapic0 pin 23 ehci1: EHCI version 1.0 ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5 usb7 at ehci1: USB revision 2.0 usb7: WARNING: power management not supported ppb6 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0x90) pci7 at ppb6 bus 8 acpi0: MCFG: 008:01:0: invalid config space (cfg[0x100]=0xffffffff, alias=false) acpi0: MCFG: bus 8: no valid devices. acpi0: acpimcfg_map_bus done pci7: i/o space, memory space enabled vga0 at pci7 dev 1 function 0: vendor 102b product 0532 (rev. 0x0a) wsdisplay0 at vga0 kbdmux 1 wsmux1: connecting to wsdisplay0 drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3a16 (rev. 0x00) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: Min/Max interval 1/367 seconds piixide0 at pci0 dev 31 function 2: Intel 82801JI Serial ATA Controller (ICH10) (rev. 0x00) piixide0: bus-master DMA support present piixide0: primary channel configured to native-PCI mode allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 4 idt entry 120 piixide0: using ioapic0 pin 19 for native-PCI interrupt atabus0 at piixide0 channel 0 piixide0: secondary channel configured to native-PCI mode atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 3a30 (rev. 0x00) allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 121 ichsmb0: interrupting at ioapic0 pin 18 iic0 at ichsmb0: I2C bus piixide1 at pci0 dev 31 function 5: Intel 82801JI Serial ATA Controller (ICH10) (rev. 0x00) piixide1: bus-master DMA support present piixide1: primary channel wired to native-PCI mode allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 4 idt entry 120 piixide1: using ioapic0 pin 19 for native-PCI interrupt atabus2 at piixide1 channel 0 piixide1: secondary channel wired to native-PCI mode atabus3 at piixide1 channel 1 isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console allocated pic ioapic0 type edge pin 4 level 8 to cpu0 slot 7 idt entry 129 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo allocated pic ioapic0 type edge pin 3 level 8 to cpu0 slot 8 idt entry 130 pckbc0 at isa0 port 0x60-0x64 pckbdprobe: reset error 5 pmsprobe: reset error 5 cpu0: unknown i686 model 1a, can't get bus clock (0x0) acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 3 us, pow 1000 mW acpicpu0: C3: FFH, lat 245 us, pow 350 mW, bus master check acpicpu0: P0: FFH, lat 10 us, pow 60000 mW, 2267 MHz acpicpu0: P1: FFH, lat 10 us, pow 50000 mW, 2133 MHz acpicpu0: P2: FFH, lat 10 us, pow 42000 mW, 2000 MHz acpicpu0: P3: FFH, lat 10 us, pow 35000 mW, 1867 MHz acpicpu0: P4: FFH, lat 10 us, pow 29000 mW, 1733 MHz acpicpu0: P5: FFH, lat 10 us, pow 24000 mW, 1600 MHz acpicpu0: id 1, lapic id 0, cap 0x0bfd, flags 0x000aea93 acpicpu0: P-state coordination: 8 CPUs, domain 0, type HW_ALL coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90 acpicpu1 at cpu1: ACPI CPU acpicpu1: id 2, lapic id 2, cap 0x0bfd, flags 0x000aea93 acpicpu1: P-state coordination: 8 CPUs, domain 1, type HW_ALL coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=90 acpicpu2 at cpu2: ACPI CPU acpicpu2: id 3, lapic id 4, cap 0x0bfd, flags 0x000aea93 acpicpu2: P-state coordination: 8 CPUs, domain 0, type HW_ALL coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=90 acpicpu3 at cpu3: ACPI CPU acpicpu3: id 4, lapic id 6, cap 0x0bfd, flags 0x000aea93 acpicpu3: P-state coordination: 8 CPUs, domain 0, type HW_ALL coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=90 acpicpu4 at cpu4: ACPI CPU acpicpu4: id 5, lapic id 16, cap 0x0bfd, flags 0x000aea93 acpicpu4: P-state coordination: 8 CPUs, domain 0, type HW_ALL coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=90 acpicpu5 at cpu5: ACPI CPU acpicpu5: id 6, lapic id 18, cap 0x0bfd, flags 0x000aea93 acpicpu5: P-state coordination: 8 CPUs, domain 0, type HW_ALL coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=90 acpicpu6 at cpu6: ACPI CPU acpicpu6: id 7, lapic id 20, cap 0x0bfd, flags 0x000aea93 acpicpu6: P-state coordination: 8 CPUs, domain 0, type HW_ALL coretemp6 at cpu6: thermal sensor, 1 C resolution, Tjmax=90 acpicpu7 at cpu7: ACPI CPU acpicpu7: id 8, lapic id 22, cap 0x0bfd, flags 0x000aea93 acpicpu7: P-state coordination: 8 CPUs, domain 0, type HW_ALL coretemp7 at cpu7: thermal sensor, 1 C resolution, Tjmax=90 acpicpu8 at cpu8: ACPI CPU acpicpu8: id 9, lapic id 1, cap 0x0bfd, flags 0x000aea93 acpicpu8: P-state coordination: 8 CPUs, domain 0, type HW_ALL acpicpu9 at cpu9: ACPI CPU acpicpu9: id 10, lapic id 3, cap 0x0bfd, flags 0x000aea93 acpicpu9: P-state coordination: 8 CPUs, domain 1, type HW_ALL acpicpu10 at cpu10: ACPI CPU acpicpu10: id 11, lapic id 5, cap 0x0bfd, flags 0x000aea93 acpicpu10: P-state coordination: 8 CPUs, domain 1, type HW_ALL acpicpu11 at cpu11: ACPI CPU acpicpu11: id 12, lapic id 7, cap 0x0bfd, flags 0x000aea93 acpicpu11: P-state coordination: 8 CPUs, domain 1, type HW_ALL acpicpu12 at cpu12: ACPI CPU acpicpu12: id 13, lapic id 17, cap 0x0bfd, flags 0x000aea93 acpicpu12: P-state coordination: 8 CPUs, domain 1, type HW_ALL acpicpu13 at cpu13: ACPI CPU acpicpu13: id 14, lapic id 19, cap 0x0bfd, flags 0x000aea93 acpicpu13: P-state coordination: 8 CPUs, domain 1, type HW_ALL acpicpu14 at cpu14: ACPI CPU acpicpu14: id 15, lapic id 21, cap 0x0bfd, flags 0x000aea93 acpicpu14: P-state coordination: 8 CPUs, domain 1, type HW_ALL acpicpu15 at cpu15: ACPI CPU acpicpu15: id 16, lapic id 23, cap 0x0bfd, flags 0x000aea93 acpicpu15: P-state coordination: 8 CPUs, domain 1, type HW_ALL Initializing SSP: 3b62b5fc5ff94b4a 64b5c35351d006e4 84c332ed1a1307cc 340bdc5b53f5169e 76a8168b58b00139 4cb4aa642a17591f a36c6fe322713602 a644f32805b2802 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 cpu1: TSC skew=-38 drift=42 cpu2: TSC skew=26 drift=-52 cpu3: TSC skew=66 drift=-72 cpu4: TSC skew=32 drift=28 cpu5: TSC skew=52 drift=-4 cpu4: running cpu3: running cpu1: running cpu6: TSC skew=-16 drift=84 cpu7: TSC skew=-28 drift=132 cpu2: running cpu5: running cpu8: TSC skew=0 drift=-12 cpu9: TSC skew=-4 drift=-38 cpu10: TSC skew=-22 drift=4 cpu11: TSC skew=-72 drift=134 cpu12: TSC skew=-18 drift=116 cpu6: running cpu13: TSC skew=14 drift=50 cpu8: running cpu14: TSC skew=-30 drift=128 cpu10: running cpu15: TSC skew=-8 drift=84 cpu7: running cpu12: running cpu11: running cpu9: running cpu13: running cpu15: running cpu14: running timecounter: Timecounter "TSC" frequency 2266839160 Hz quality 3000 sd0 at scsibus0 target 0 lun 0: disk fixed uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb6: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhub5 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub5: 6 ports with 6 removable, self powered uhub6 at usb5: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub6: 2 ports with 2 removable, self powered uhub7 at usb7: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub7: 6 ports with 6 removable, self powered sd0: 139 GB, 50862 cyl, 12 head, 480 sec, 512 bytes/sect x 292967936 sectors arcmsr0: unable to query firmware for sensor info sd1 at scsibus0 target 0 lun 1: disk fixed sd1: 3725 GB, 64587 cyl, 252 head, 60 sec, 4096 bytes/sect x 976562432 sectors IPsec: Initialized Security Association Processing. sd1: GPT GUID: f38f36f2-f3bc-436b-9894-07336865f73c dk0 at sd1: "disk1", 976562421 blocks at 6, type: ffs acpicpu15: ACPI CPUs started ehci0: handing over full speed device on port 3 to uhci1 uhub5: port 3, device disappeared after reset uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: American Megatrends Inc. (0x46b) Virtual Keyboard and Mouse (0xff10), rev 1.10/1.00, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 Variable keys, 6 Array codes wskbd0 at ukbd0 mux 1 wskbd0: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 uhidev1: American Megatrends Inc. (0x46b) Virtual Keyboard and Mouse (0xff10), rev 1.10/1.00, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse0 at ums0 mux 0 ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 atapibus0 at atabus2: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) crypto: assign driver 0, flags 2 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 26 flags 0 maxoplen 0 crypto: driver 0 registers alg 27 flags 0 maxoplen 0 crypto: driver 0 registers alg 29 flags 0 maxoplen 0 crypto: driver 0 registers alg 33 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 19 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 20 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 24 flags 0 maxoplen 0 crypto: driver 0 registers alg 25 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 21 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 28 flags 0 maxoplen 0 crypto: driver 0 registers alg 30 flags 0 maxoplen 0 crypto: driver 0 registers alg 31 flags 0 maxoplen 0 crypto: driver 0 registers alg 32 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 crypto: driver 0 registers alg 23 flags 0 maxoplen 0 crypto: driver 0 registers alg 22 flags 0 maxoplen 0 pad: requested 1 units pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture, mmap pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100 spkr1 at audio0: PC Speaker (synthesized) Searching for RAID components... WARNING: 1 error while detecting hardware; check system log. boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs kern.module.path=/stand/amd64/8.0/modules wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)