NetBSD 6.1.2 (GENERIC) total memory = 503 MB avail memory = 482 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Supermicro P4SGR (1234567890) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 3.06GHz, id 0xf27 cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) 4 CPU 3.06GHz, id 0xf27 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button MEM (PNP0C01) at acpi0 not configured FWH (INT0800) at acpi0 not configured PMIO (PNP0C02) at acpi0 not configured SYSR (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 FDC0 (PNP0700) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured UAR2 (PNP0501) at acpi0 not configured ECP1 (PNP0401) at acpi0 not configured PSMR (PNP0C02) at acpi0 not configured acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan acpitz0 at acpi0 (THRM): cpu0 acpitz0: active cooling level 0: 80.0C acpitz0: levels: critical 100.0 C, passive 80.0 C apm0 at acpi0: Power Management spec V1.2 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2560 (rev. 0x03) agp0 at pchb0: detected 8060k stolen memory agp0: aperture at 0xe0000000, size 0x8000000 vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2562 (rev. 0x03) wsdisplay0 at vga1 kbdmux 1 wsmux1: connecting to wsdisplay0 i915drm0 at vga1: Intel i845G GMCH i915drm0: AGP at 0xe0000000 128MB i915drm0: Initialized i915 1.6.0 20080730 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x02) uhci0: interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x02) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x02) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x02) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x82) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled wm0 at pci1 dev 5 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02) wm0: interrupting at ioapic0 pin 22 wm0: 32-bit 33MHz PCI bus wm0: 64 word (6 address bits) MicroWire EEPROM wm0: Ethernet address 00:30:48:41:d2:20 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci1 dev 6 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02) wm1: interrupting at ioapic0 pin 23 wm1: 32-bit 33MHz PCI bus wm1: 64 word (6 address bits) MicroWire EEPROM wm1: Ethernet address 00:30:48:41:d2:21 makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3 makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24c0 (rev. 0x02) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. gpio0 at ichlpcib0: 64 pins fwhrng0 at ichlpcib0: Intel Firmware Hub Random Number Generator piixide0 at pci0 dev 31 function 1: Intel 82801DB IDE Controller (ICH4) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24c3 (rev. 0x02) ichsmb0: interrupting at ioapic0 pin 17 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu1 at cpu1: ACPI CPU timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered wd0 at atabus0 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: LITE-ON Technology USB NetVista Full Width Keyboard., rev 1.10/1.09, addr 2, iclass 3/1 ukbd0 at uhidev0 wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) Kernelized RAIDframe activated boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wskbd0 at ukbd0 mux 1 wskbd0: connecting to wsdisplay0 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)