Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.1_STABLE (GENERIC) #0: Tue Sep 13 19:07:10 CEST 2011 kiers@diorella.boppelans.net:/disk1/obj/sys/arch/amd64/compile/GENERIC total memory = 8190 MB avail memory = 7925 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 SMBIOS rev. 2.4 @ 0xcff6a000 (45 entries) Supermicro X7DBU (0123456789) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 2000MHz, id 0x6fb cpu1 at mainbus0 apid 4: Intel 686-class, 2000MHz, id 0x6fb cpu2 at mainbus0 apid 1: Intel 686-class, 2000MHz, id 0x6fb cpu3 at mainbus0 apid 5: Intel 686-class, 2000MHz, id 0x6fb cpu4 at mainbus0 apid 2: Intel 686-class, 2000MHz, id 0x6fb cpu5 at mainbus0 apid 6: Intel 686-class, 2000MHz, id 0x6fb cpu6 at mainbus0 apid 3: Intel 686-class, 2000MHz, id 0x6fb cpu7 at mainbus0 apid 7: Intel 686-class, 2000MHz, id 0x6fb ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0 apid 9: pa 0xfec80000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId , AslId < LTP,00000000> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 FWHD (INT0800) at acpi0 not configured pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12 COM1 (PNP0501) at acpi0 not configured COM2 (PNP0501) at acpi0 not configured FDC (PNP0700) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x25d8 (rev. 0xb1) ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0xb1) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok ppb3 at pci2 dev 1 function 0: vendor 0x8086 product 0x3514 (rev. 0x01) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok ppb4 at pci2 dev 2 function 0: vendor 0x8086 product 0x3518 (rev. 0x01) pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled, rd/line, wr/inv ok wm0 at pci5 dev 0 function 0: i80003 dual 1000baseT Ethernet, rev. 1 wm0: interrupting at ioapic0 pin 18 wm0: PCI-Express bus wm0: 65536 word (16 address bits) SPI EEPROM wm0: Ethernet address 00:30:48:7c:8a:1a ikphy0 at wm0 phy 1: i82563 10/100/1000 media interface, rev. 2 ikphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci5 dev 0 function 1: i80003 dual 1000baseT Ethernet, rev. 1 wm1: interrupting at ioapic0 pin 19 wm1: PCI-Express bus wm1: 65536 word (16 address bits) SPI EEPROM wm1: Ethernet address 00:30:48:7c:8a:1b ikphy1 at wm1 phy 1: i82563 10/100/1000 media interface, rev. 2 ikphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb5 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01) ppb5: disabling notification events pci6 at ppb5 bus 6 pci6: i/o space, memory space enabled, rd/line, wr/inv ok ppb6 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0xb1) pci7 at ppb6 bus 7 pci7: i/o space, memory space enabled, rd/line, wr/inv ok ppb7 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0xb1) pci8 at ppb7 bus 8 pci8: i/o space, memory space enabled, rd/line, wr/inv ok 3ware 9650SE series: (rev. 0x01) twa0 at pci8 dev 0 function 0: 3ware Apache twa0: 64bit DMA addressing activetwa0: interrupting at ioapic0 pin 18 twa0: AEN 0x0053: INFO: Battery capacity test needed: twa0: 4 ports, Firmware FE9X 4.10.00.007, BIOS BE9X 4.08.00.002 twa0: Monitor BL9X 3.08.00.001, PCB Rev 035 , Achip 1.90 , Pchip 2.00 twa0: port 0: Hitachi HDS722020ALA330 1907729 MB twa0: port 1: Hitachi HDS722020ALA330 1907729 MB twa0: port 2: Hitachi HDS722020ALA330 1907729 MB twa0: port 3: Hitachi HDS722020ALA330 1907729 MB twa0: AMCC 9650SE-4LP DISK 4.10YBJXTK6DE79B7F00AA69 ld0 at twa0 unit 0 ld0: 1862 GB, 243151 cyl, 255 head, 63 sec, 512 bytes/sect x 3906228224 sectors twa0: AMCC 9650SE-4LP DISK 4.10YBJXTNVDE79B8400701B ld1 at twa0 unit 1 ld1: 1862 GB, 243151 cyl, 255 head, 63 sec, 512 bytes/sect x 3906228224 sectors vendor 0x8086 product 0x1a38 (miscellaneous system, revision 0xb1) at pci0 dev 8 function 0 not configured pchb1 at pci0 dev 16 function 0 pchb1: vendor 0x8086 product 0x25f0 (rev. 0xb1) pchb2 at pci0 dev 16 function 1 pchb2: vendor 0x8086 product 0x25f0 (rev. 0xb1) pchb3 at pci0 dev 16 function 2 pchb3: vendor 0x8086 product 0x25f0 (rev. 0xb1) pchb4 at pci0 dev 17 function 0 pchb4: vendor 0x8086 product 0x25f1 (rev. 0xb1) pchb5 at pci0 dev 19 function 0 pchb5: vendor 0x8086 product 0x25f3 (rev. 0xb1) pchb6 at pci0 dev 21 function 0 pchb6: vendor 0x8086 product 0x25f5 (rev. 0xb1) pchb7 at pci0 dev 22 function 0 pchb7: vendor 0x8086 product 0x25f6 (rev. 0xb1) uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09) uhci0: interrupting at ioapic0 pin 17 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09) ehci0: interrupting at ioapic0 pin 17 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 ppb8 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9) pci9 at ppb8 bus 9 pci9: i/o space, memory space enabled vga0 at pci9 dev 1 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 wsmux1: connecting to wsdisplay0 drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0 ichlpcib0: vendor 0x8086 product 0x2670 (rev. 0x09) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. piixide0 at pci0 dev 31 function 1 piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x269b (rev. 0x09) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 2000168220 Hz quality 3000 uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered uhub3 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA) Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture boot device: ld0 root on ld0a dumps on ld0b root file system type: ffs /var: replaying log to disk /usr: replaying log to disk wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) /home: replaying log to disk /disk1: replaying log to disk